Comments for Johnny's World http://www.jkutz.com/blog The GateWay for JoHnnytk36 - Jonathan Kutz Mon, 19 Sep 2011 04:11:55 +0000 hourly 1 http://wordpress.org/?v=3.2.1 Comment on UPDATED: My Newest Gmail Filter by Jaimin Rajani http://www.jkutz.com/blog/gmail/my-newest-gmail-filter/comment-page-1/#comment-787 Jaimin Rajani Mon, 19 Sep 2011 04:11:55 +0000 http://www.jkutz.com/blog/?p=442#comment-787 Here's a nice way of filtering out newsletters - <a href="http://www.tech.nolicio.us/2011/09/gmail-filter-to-prevent-newsletters.html" rel="nofollow">http://www.tech.nolicio.us/2011/09/gmail-filter-t...</a> Here's a nice way of filtering out newsletters – http://www.tech.nolicio.us/2011/09/gmail-filter-t…

]]> Comment on OtterBox Defender by Gary http://www.jkutz.com/blog/projects/otterbox-defender/comment-page-1/#comment-780 Gary Sun, 24 Jul 2011 07:31:28 +0000 http://www.jkutz.com/blog/?p=102#comment-780 Great video! I'm planning on doing this on on my Otterbox Defender for my iPhone4. May I make a suggestion?... I was actually thinking of putting it on the Clip of the defender. I think it might actually be easier to do just on the back of the clip that would normally go over your pants. Also with the clip it rotates 360 degrees so I think it would make the iphone even more useful for different photography. Let me know what you think. Gmaster0302@gmail.com Have a good day. I'm looking forward to your next video on Youtube. Peace. Great video! I'm planning on doing this on on my Otterbox Defender for my iPhone4. May I make a suggestion?… I was actually thinking of putting it on the Clip of the defender. I think it might actually be easier to do just on the back of the clip that would normally go over your pants. Also with the clip it rotates 360 degrees so I think it would make the iphone even more useful for different photography. Let me know what you think. Gmaster0302@gmail.com Have a good day. I'm looking forward to your next video on Youtube. Peace.

]]> Comment on OtterBox Defender by Jonathan http://www.jkutz.com/blog/projects/otterbox-defender/comment-page-1/#comment-482 Jonathan Mon, 16 May 2011 14:26:22 +0000 http://www.jkutz.com/blog/?p=102#comment-482 I am sure you could try, but it will not be as strong as the mechanical fastening using rivets. That was the whole point. JB Weld or Plastic Weld doesn't always work with all plastics or make a strong enough hold as i would want to trust my iPhone too. I am sure you could try, but it will not be as strong as the mechanical fastening using rivets. That was the whole point. JB Weld or Plastic Weld doesn’t always work with all plastics or make a strong enough hold as i would want to trust my iPhone too.

]]> Comment on OtterBox Defender by Scooter Allison http://www.jkutz.com/blog/projects/otterbox-defender/comment-page-1/#comment-469 Scooter Allison Mon, 16 May 2011 03:10:17 +0000 http://www.jkutz.com/blog/?p=102#comment-469 Could you use JB Weld or Plastic Weld to mount the nut to the plastic part of the Otterbox without using the rivets? Could you use JB Weld or Plastic Weld to mount the nut to the plastic part of the Otterbox without using the rivets?

]]> Comment on Microphone Adapter “Line In” Schematics by Dim http://www.jkutz.com/blog/projects/iphone-projects/iphone-microphone-adapter/microphone-adapter-line-in-schematics/comment-page-1/#comment-167 Dim Tue, 10 Aug 2010 22:38:43 +0000 http://www.jkutz.com/blog/?p=449#comment-167 To get it to work with an iPhone 4 and a guitar you have to change the value of the R1 resistor to about 1K. Otherwise the iPhone wont detect that you've connected an external microphone. To get it to work with an iPhone 4 and a guitar you have to change the value of the R1 resistor to about 1K. Otherwise the iPhone wont detect that you've connected an external microphone.

]]> Comment on Microphone Adapter “Line In” Schematics by fernando cardozo http://www.jkutz.com/blog/projects/iphone-projects/iphone-microphone-adapter/microphone-adapter-line-in-schematics/comment-page-1/#comment-164 fernando cardozo Tue, 27 Jul 2010 02:26:18 +0000 http://www.jkutz.com/blog/?p=449#comment-164 would you have a project to bind a guitar? would you have a project to bind a guitar?

]]> Comment on OtterBox Defender by @henkvaness http://www.jkutz.com/blog/projects/otterbox-defender/comment-page-1/#comment-149 @henkvaness Sat, 30 Jan 2010 06:41:23 +0000 http://www.jkutz.com/blog/?p=102#comment-149 or... do this <a href="http://bit.ly/aiJFza" target="_blank">http://bit.ly/aiJFza</a> or… do this http://bit.ly/aiJFza

]]> Comment on Microphone Adapter “Line In” Schematics by stephan schulz http://www.jkutz.com/blog/projects/iphone-projects/iphone-microphone-adapter/microphone-adapter-line-in-schematics/comment-page-1/#comment-148 stephan schulz Fri, 29 Jan 2010 14:59:32 +0000 http://www.jkutz.com/blog/?p=449#comment-148 this is great information. and it works great for me. here a bit of what i found: i tried to connect a small pre-amp to the ipod but no signal was recognized, using voice memos. than i tried connecting ipod and laptop to my mic at the same time. and when ever i plugged the laptop in too the ipod was also able to receive a signal. i am not sure what is going on. but your solution works super. i also noticed that the mic ring on the ipod touch delivers 2.5 volt. i am now able to connect a contact mic to the ipod touch without any opamp or preamp. thanks. stephan schulz this is great information. and it works great for me.

here a bit of what i found:

i tried to connect a small pre-amp to the ipod but no signal was recognized, using voice memos.
than i tried connecting ipod and laptop to my mic at the same time. and when ever i plugged the laptop in too the ipod was also able to receive a signal.

i am not sure what is going on. but your solution works super.

i also noticed that the mic ring on the ipod touch delivers 2.5 volt.

i am now able to connect a contact mic to the ipod touch without any opamp or preamp.
thanks.
stephan schulz

]]> Comment on UPDATED: iPhone Microphone Adapter cable by David http://www.jkutz.com/blog/projects/iphone-microphone-apadter-cable/comment-page-1/#comment-147 David Thu, 28 Jan 2010 19:24:04 +0000 http://www.jkutz.com/blog/?p=82#comment-147 Have a look at <a href="http://www.kvconnection.com" target="_blank">http://www.kvconnection.com</a> as they make an inexpensive but hand made adapter. You should be able to feed this with something like a lavalier which has its own power source. Have a look at http://www.kvconnection.com as they make an inexpensive but hand made adapter. You should be able to feed this with something like a lavalier which has its own power source.

]]> Comment on My iPhone Tripod Case Mod Tutorials Are DONE. by Roger http://www.jkutz.com/blog/projects/my-iphone-tripod-case-mod-tutorials-are-done/comment-page-1/#comment-144 Roger Tue, 29 Dec 2009 00:09:05 +0000 http://www.jkutz.com/blog/?p=207#comment-144 Great idea... Would like to purchase two of the switcheasy rebels for my iphone... Saw the demo on DRock Florida utube... Can you make two for me? Black would be my preferd color :) Great idea… Would like to purchase two of the switcheasy rebels for my iphone… Saw the demo on DRock Florida utube… Can you make two for me? Black would be my preferd color :)

]]>